Simple yet useful tips for making home foundations

Posted on September 8, 2018 by

Before you determine the right foundation for your home, you need to pay attention to soil conditions. Are the soil conditions for your house building hard or soft. This is to ensure that the foundation of the house remains stable and does not experience a decline that can harm your home. Aside from that, check out the recommended fix slab foundation near you as well.

Soil Conditions

The first thing to pay attention to in developing regulations is the condition of the land that will be occupied to build the house. This aims to determine the next step in building a house. For example, if the location of the place has a loose soil character, then compaction is necessary.

If your house is on sloping land

Make a multilevel structure

With a multilevel structure, of course, it will save the cost of backfilling, even if there are those that have to be dredged to level, of course only a small part. If the slope elevation is not large, the difference in height of the surface of one space can be connected to a sloping staircase. Whereas if the elevation is sharp, there are parts that must be dredged and other parts are worse. His artistry is in fluctuations or the height of the room created.

Make the height of the rear foundation and level the ground or elevate the rear part of the land

The high rear foundation is intended as a retaining soil to equalize the height with the front. This method can only be done on land that has a height difference of not more than 2 meters if more than that is impossible to do. Even if you need to make urugan until the back is higher than the front, so the construction is stronger.

The next step to make the right home foundation is the depiction of the foundation design, then proceed with the excavation of the foundation grooves in accordance with the drawings made. Prepare rock, cement, and sand, if necessary prepare also oval iron along with wire as column and sloof formwork (lane above foundation). Column and sloof formwork are needed as a support and base frame of the house, especially as a reinforcement wall.

Leave a Reply

Your email address will not be published. Required fields are marked *